System Downtime Notification
From Saturday, August 30, 2014 from 8:00 am EST to 11:59 pm EST, usgbc.org will be offline for site maintenance.
Email us or call 1-800-795-1747 for assistance. Thanks for your patience.
Please upgrade your browser. This site requires a newer version to work correctly. Read more
Our "watch" feature allows you to stay current on all aspects of this specific credit. In your account, you can control what you get updated on and how you receive your notifications. Hide

| v1 - LEED 1.0 pilot

Steep slope protection

SLLc8 | Possible 1 point

Intent

Minimize erosion to protect habitat and reduce stress on natural water systems by preserving steep slopes in a natural, vegetated state.

Requirements

Option 1

Avoid disturbing portions of project sites that have pre-project slopes greater than 15%;

OR
Option 2- For previously developed sites only

On portions of project sites with pre-project slopes greater than 15%:

    a. treat any fractions of the site that have not been previously developed by complying with the requirements for sites that are not previously developed set forth in Option 3;

    OR

    b. restore native plants or adapted plants to 100% of any previously developed slopes over 40%; 60% of any previously developed slopes between 25%-40%; and 40% of any previously developed slopes between 15%-25%;

OR
Option 3

On portions of project sites with pre-project slopes greater than 15% that are not previously developed sites:

  • do not disturb slopes greater than 40% and do not disturb portions of the project site within 50 feet of the top of the slope, and 75 feet from the toe of the slope;
  • limit development to no more than 40% of slopes between 25%-40%, and to no more than 60% of slopes between 15%-25%.
  • locate development such that the percentage of the development footprint that is on pre-project slopes less than 15% is greater than the percentage of buildable land that has pre-project slopes less than 15%.

For all three options, those portions of project sites with slopes up to 20 feet in elevation (toe to top) that are more then 30 feet in any direction from another slope greater than 15% are exempt from the requirements, although more restrictive local regulations may apply.

For Options 2 and 3, develop CC&Rs, development agreements, or other binding documents that will protect the specified steep slope areas in perpetuity.

Join LEEDuser

Ask questions, share tips, and get notified of new forum posts by joining LEEDuser, a tool developed by BuildingGreen and supported by USGBC!

  • Share on Twitter
  • Share on Facebook
  • Share on LinkedIn
  • Print to PDF
Sample forms
View sample forms

0 commentsLeave a comment

Leave a comment Don't have an account? Create one

You must be signed in to leave a comment.