Entry Type ID Date Applicable Rating System Primary Credit Inquiry (LIs) Ruling (LIs) Related Addenda/LIs Related Resources Campus Applicable Internationally Applicable Country Applicability Reference Guide (Addenda) Page (Addenda) Location (Addenda) Description of Change (Addenda) "LEED Interpretation" "10056" "2011-05-09" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "Can a rural project earn MRc5 if materials are manufactured slightly outside of 500 miles in order to obtain construction material with more sustainable features?" "No, the project\'s request for a waiver due to its remote location is not acceptable. The site\'s remote location does not reduce the environmental impact resulting from the transportation of material which is the intent of the credit. Applicable internationally." "None" "None" "X" "LEED Interpretation" "2036" "2008-02-25" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "Our project is a 9 million SF Graduate University located 60 km North of Jeddah in Saudi Arabia. The University will be dedicated to the research of alternative fuels and renewable energy. The entire campus will be New Construction on a Greenfield site and will consist of research labs, lab support areas, administration buildings, a library, a commons building, food service, an auditorium, conference rooms, lecture halls, offices and public areas. Regionally manufactured building materials are not readily available due to the project location and unoccupied nature of certain areas of Saudi Arabia. Only a small portion of the building materials can be obtained within 500 miles. As a result, a good majority of the materials that will be acquired for the project will be delivered by sea from adjacent countries. Similar conditions exist in Canada. The unoccupied regions of Canada influence the availability of building materials and methods to transport those materials. These conditions have allowed the Canadian LEED rating system to implement a larger distance allowance for the regional materials Credit. Different modes of transport have different fuel efficiencies in transporting goods. LEED Canada-NC 1.0 acknowledges these differences by extending the permissible transportation distance to 1500 miles for those goods transported by rail or by ship. Truck - 2127 KJ/ton*km Rail road - 373 KJ/ton*km Shipping - 138 KJ/ton*km The intent of this Credit is to ""reduce the environmental impacts resulting from transportation."" The above transport options show significant reduction in energy and fossil fuel use for rail and boat transport. Due to the project site conditions and site transport options, our project is seeking interpretation to use the Canadian requirements for the Regional Materials Credits. The Canadian requirements can be found below. Please advise on our project\'s ability to use this interpretation. Canadian LEED NC 1.0 Regional Materials Requirements Use a minimum of 10% / 20% of building materials or products for which at least 80% of the mass is extracted, processed and manufactured within 800 km (500 miles) of the project site. OR Use a minimum of 10% / 20% of building materials or products for which at least 80% of the mass is extracted, processed and manufactured within 2400 km (1500 miles) of the project site, and shipped by rail or water. OR Use a minimum of 10% / 20% of building materials or products that reflect a combination of the above extraction, processing, manufacturing and shipping criteria (e.g., 5% within 800 km (500 miles) and 5% shipped by rail within 2400 km (1500 miles))." "This CIR is requesting that the project be permitted to substitute the existing MRc5 credit requirements with those found in the Canadian Green Building Council LEED Rating System. The CAGBC LEED requirement allows for materials to be harvested from a larger area (1500 mile radius) if it reaches the site by lower emission transportation (ship and rail.) While the proposal certainly aims to reduce the environmental impacts resulting from material transportation, it does not address the portion of the credit aimed at supporting the use of indigenous materials. Furthermore, the CAGBC LEED rating system has been developed specifically for the Canadian construction and transportation industries, and it may not be appropriate to use it in place of the USGBC requirements as applied on this Jeddah, Saudi Arabia site. However, the intent of the project to reduce the emissions associated with the transportation of materials is commendable and should be pursued as an innovation point. As such, the credit submission should include a narrative explaining local common practices for transport of materials and how this strategy surpasses those for environmental benefit. Resources on past innovation points that have been pursued for Life Cycle Analysis can be found in the Innovation in Design Credit Catalog, issued on 12/7/07. The USGBC also anticipates that credit requirements for comprehensive carbon emission reduction on a building project will be available by the end of the year. If the construction schedule permits, this could be an option for the project to receive credit for their efforts. Applicable Internationally; Canada; Saudi Arabia. " "None" "None" "X" "Canada, Saudi Arabia" "LEED Interpretation" "2426" "2008-12-04" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "See below for alternative method on illustrating regional manufactured, extracted or processed materials in LEED-CIv2.0" "In order to verify that the extraction, harvest, recovery and manufacture site is located within a 500 mile radius of the project site, project teams are required to indicate the actual mileage between the project site and the manufacturer and similarly, the distance between the project site and the extraction site for each raw material in the submittal template. ALTERNATIVELY, a statement on the manufacturer\'s letter head indicating that the point of extraction, harvest, recovery or manufacture is within 500 miles of the LEED project site, will also be accepted as part of the LEED documentation and credit submittals. Applicable Internationally. " "None" "None" "X" "LEED Interpretation" "2427" "2008-12-04" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "See below for alternative method on illustrating regional manufactured, extracted or processed materials in LEED-NCv2.1" "In order to verify that the extraction, harvest, recovery and manufacture site is located within a 500 mile radius of the project site, project teams are required to indicate the actual mileage between the project site and the manufacturer and similarly, the distance between the project site and the extraction site for each raw material in the submittal template. ALTERNATIVELY, a statement on the manufacturer\'s letter head indicating that the point of extraction, harvest, recovery or manufacture is within 500 miles of the LEED project site, will also be accepted as part of the LEED documentation and credit submittals." "None" "None" "LEED Interpretation" "2429" "2008-12-04" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "See below for alternative method on illustrating regional manufactured, extracted or processed materials in LEED-CSv2.0" "In order to verify that the extraction, harvest, recovery and manufacture site is located within a 500 mile radius of the project site, project teams are required to indicate the actual mileage between the project site and the manufacturer and similarly, the distance between the project site and the extraction site for each raw material in the submittal template. ALTERNATIVELY, a statement on the manufacturer\'s letter head indicating that the point of extraction, harvest, recovery or manufacture is within 500 miles of the LEED project site, will also be accepted as part of the LEED documentation and credit submittals." "None" "None" "LEED Interpretation" "2430" "2008-12-04" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "See below for alternative method on illustrating regional manufactured, extracted or processed materials in LEED-Schools" "In order to verify that the extraction, harvest, recovery and manufacture site is located within a 500 mile radius of the project site, project teams are required to indicate the actual mileage between the project site and the manufacturer and similarly, the distance between the project site and the extraction site for each raw material in the submittal template. ALTERNATIVELY, a statement on the manufacturer\'s letter head indicating that the point of extraction, harvest, recovery or manufacture is within 500 miles of the LEED project site, will also be accepted as part of the LEED documentation and credit submittals." "None" "None" "LEED Interpretation" "2431" "2008-12-04" "New Construction, Commercial Interiors, Core and Shell, Schools - New Construction" "See below for alternative method on illustrating regional manufactured, extracted or processed materials in LEED-NCv2.2" "In order to verify that the extraction, harvest, recovery and manufacture site is located within a 500 mile radius of the project site, project teams are required to indicate the actual mileage between the project site and the manufacturer and similarly, the distance between the project site and the extraction site for each raw material in the submittal template. ALTERNATIVELY, a statement on the manufacturer\'s letter head indicating that the point of extraction, harvest, recovery or manufacture is within 500 miles of the LEED project site, will also be accepted as part of the LEED documentation and credit submittals." "None" "None"