To promote transportation efficiency, including reduced vehicle miles traveled (VMT). To promote walking by providing safe, appealing, and comfortable street environments that support public health by reducing pedestrian injuries and encouraging daily physical activity.
A project may earn a maximum of 12 points according to the schedule in Table 1:
Facades and entries
- At least 80% of the total linear feet of street-facing building façades in the project is no more than 25 feet from the property line.
- At least 50% of the total linear feet of street-facing building façades in the project is no more than 18 feet from the property line.
Figure 1. Minimal street-facing building façade setbacks
- At least 50% of the total linear feet of mixed-use and nonresidential street-facing building façades in the project is within 1 foot of a sidewalk or equivalent provision for walking.
- Functional entries to the buildings occur at an average of 75 feet or less along nonresidential or mixed-use buildings or blocks.
Figure 2. Functional building entries at minimum average distances along blocks
- Functional entries to the buildings occur at an average of 30 feet or less along nonresidential or mixed-use buildings or blocks (items d and e are cumulative).
- All ground-level retail, service, and trade uses that face a public space have clear glass on at least 60% of their façades between 3 and 8 feet above grade.
Figure 3. Ground-level retail and service uses with minimum amounts of clear glass façades
- If a façade extends along a sidewalk, no more than 40% of its length or 50 feet, whichever is less, is blank (without doors or windows).
Figure 4. Limits on length of blank walls along sidewalks
- Any ground-level retail, service, or trade windows must be kept visible (unshuttered) at night; this must be stipulated in covenants, conditions, and restrictions (CC&R) or other binding documents.
- On-street parking is provided on a minimum of 70% of both sides of all new and existing streets, including the project side of bordering streets. The percentage of on-street parking is calculated by dividing the length of street designated for parking by the total length of the curb along each street, including curb cuts, driveways, and intersection radii. Space within the parking lane that is occupied by corner bulbouts (within 24 feet of an intersection), transit stops, and motorcycle or bicycle parking may be counted as designated for parking in this calculation. Woonerfs are not considered streets for this subsection.
Figure 5. On-street parking requirements
- Continuous sidewalks or equivalent provisions for walking are available along both sides of all streets within the project, including the project side of streets bordering the project. New sidewalks, whether adjacent to streets or not, must be at least 10 feet wide on retail or mixed-use blocks and at least 5 feet wide on all other blocks. Equivalent provisions for walking include woonerfs and all-weather-surface footpaths at least 5 feet wide. Note that these requirements specify wider sidewalks than required by NPD Prerequisite 1, Walkable Streets.
- If the project has ground-floor dwelling units, the principal floor of at least 50% of those units must have an elevated finished floor no less than 24 inches above the sidewalk grade. Below-grade basement spaces and/or accessory dwelling units are exempt from this requirement.
Figure 6. Minimal above-grade entrance requirements
- In nonresidential or mixed-use projects, 50% or more of the total number of office buildings include ground-floor retail along 60% of the length of the street-level façade; 100% of mixed-use buildings include ground-floor retail, live-work spaces, and/or ground-floor dwelling units along at least 60% of the street-level façade; and all businesses and/or other community services on the ground floor are accessible directly from sidewalks along a public space, such as a street, square, paseo, or plaza, but not a parking lot.
- At least 40% of all street frontage within the project has a minimum building-height-to-street-width ratio of 1:3 (i.e., a minimum of 1 foot of building height for every 3 feet of street width).
- Nonmotorized rights-of-way may be counted toward the 40% requirement, but 100% of such spaces must have a minimum 1:1 ratio of building height to street width.
- Projects with bordering street frontage must meet only their proportional share of the height-to-width ratio (i.e., only on the project side of the street).
- Street frontage is measured in linear feet.
- Building height is measured to eaves or the top of the roof for a flat-roof structure, and street width is measured façade to façade. For building frontages with multiple heights, use the weighted average height of all frontage segments based on each segment's height weighted by the segment's share of total building width.
- Alleys and driveways are excluded.
- 75% of residential-only streets within the project are designed for a target speed of no more than 20 mph. (existing streets may be exempted from calculations)
- 70% of nonresidential and/or mixed-use streets within the project are designed for a target speed of no more than 25 mph. A multiway boulevard, with travel lanes separated from access lanes by medians, may apply this requirement to its outer access lanes only (through-lanes are exempt), provided pedestrian crosswalks are installed across the boulevard at intervals no greater than 800 feet. (existing streets may be exempted from calculations)
- At-grade crossings with driveways account for no more than 10% of the length of sidewalks within the project.
Ground-level use and parking
Design speeds for safe pedestrian and bicycle travel
Ask questions, share tips, and get notified of new forum posts by joining LEEDuser, a tool developed by BuildingGreen and supported by USGBC!
No sample form available for this credit.View all sample forms