To reduce indoor water consumption.
Nonresidential buildings, mixed-use buildings, and multifamily residential buildings four stories or more
For new buildings and buildings undergoing major renovations as part of the project, reduce indoor water usage by an average of 20% from a baseline. All newly installed toilets, urinals, private lavatory faucets, and showerheads that are eligible for labeling must be WaterSense labeled (or a local equivalent for projects outside the U.S.).
For the fixtures and fittings listed in Table 1, as applicable to the project scope, reduce water consumption by 20% from the baseline. Base calculations on the volumes and flow rates shown in Table 1.
The design case is calculated as a weighted average of water usage for the buildings constructed as part of the project based on their floor area.
Table 1. Baseline water consumption of fixtures and fittings
|Commercial Fixtures, Fittings, and Appliances||Current Baseline (IP Units)||Current Baseline (SI units)|
|Water closets (toilets)*||1.6 gallons per flush (gpf)||6 liters per flush (lpf)|
|Urinal*||1.0 (gpf)||3.8 lpf|
|Public lavatory (restroom) faucet||0.5 gpm at 60 psi** all others except private applications||1.9 lpm at 415 kPa, all others except private applications|
|Private lavatory faucet*||2.2 gpm at 60 psi||8.3 lpm at 415 kPa|
|Kitchen faucet (excluding faucets used exclusively for filling operations)||2.2 gpm at 60 psi||8.3 lpm at 415 kPa|
|Showerhead*||2.5 gpm at 80 psi per shower stall||9.5 lpm at 550 kPa per shower stall|
|* WaterSense label available for this product type
gpf = gallons per flush
gpm = gallons per minute
psi = pounds per square inch
lpf = liters per flush
lpm = liters per minute
kPa = kilopascals
New single-family residential buildings and new multiunit residential buildings three stories or fewer
90% of residential buildings must use a combination of fixtures and fittings that would earn 2 points under LEED for Homes 2012 WE Credit Indoor Water Use.
Ask questions, share tips, and get notified of new forum posts by joining LEEDuser, a tool developed by BuildingGreen and supported by USGBC!
No sample form available for this credit.View all sample forms